[bsa_pro_ad_space id=14]
Shop for New Auto Parts at 1AAuto.com
In the video, 1A Auto shows how to cut out, patch and finish a rust hole or otherwise damaged body panel. The video is applicable to all steel paneled vehicles.
? List of tools used:
• Flat Blade Screwdriver
• Cutoff Wheel
• Vacuum
• Welder
• Welding Helmet
• Welding Magnet
• Metal Cutters
• Acetone
• Body Filler
• Dust Mask
• Gloves
• Marker / Writing Utensil
• Painter’s Tape
• Paper Towels
• Safety Glasses
• Sandpaper
• Spray Paint
• Spray Primer
• Bucket
• Cardboard
• Grinder
• Hammer
• Plastic Sheet
• Sanding Block
For More Info visit us at
⚠ DISCLAIMER:
While 1A Auto strives to make the information provided in this video as accurate as possible, it makes no claims, promises, or guarantees about the accuracy, completeness or applicability of the content. No information contained in this video shall create any expressed or implied warranty or guarantee of any particular result. All do-it-yourself projects entail some risk. It is the sole responsibility of the viewer to assume this risk. 1A Auto is not responsible or liable for any loss damage (including, but not limited to, actual, consequential, or punitive), liability, claim, or any other injury or cause related to or resulting from any information posted in this video.
[bsa_pro_ad_space id=15]
Likes: 196
Views: 8037
I would have atleast sanded down that rust and added two costs of rust restore and a coat of enamel.
Final product looks great thouugh 🙂
that's a whole lot of work just to remove 1 rust spot
Nice work. Body work is such a pain but so satisfying.
?
What state won't pass a vehicle with a rust hole? That's re tarted. Good job fixing the hole though.
That color match is way off. The new part that you did is way darker. But good job on the body work.