Easy steps to replace car ignition coils.
Step 1: Open the hood and locate the vehicle’s ignition coil
Step 2: Make sure the engine is completely cool. Disconnect the vehicle’s negative battery cable
Step3 : Remove any components that block access to the ignition coils in your vehicle.
Step 4: Disconnect the spark plug wires from the coil, grasping the wire at the boot to disconnect it.
Step 5: Insert the replacement ignition coil into the valve cover. Tighten the mounting bolts to the correct torque for your vehicle
Step 6: Replace all parts that were removed or unplugged to reach the coils and connect the negative battery cable
Step 7: Start the vehicle and perform a road test to verify the ignition coil is working properly
Visit http://www.automotix.net/autorepair/diy/ford-explorer-repair.html for our Do It Yourself Kit with easy step-by-step instructions.
Likes: 0
Views: 35